Water Heater Stopped Suddenly? Here's What to Do Next
Water Heater Stopped Suddenly? Here's What to Do Next
Blog Article
What're your ideas concerning Hot Water Heater Repair?
Many modern residences take advantage of an electrical water heater for their heating unit, due to its comfort as well as ease of use. However, similar to any other electric home appliances, problems may emerge with its use, suddenly. It can be truly aggravating to wake up to a cool shower rather than a hot one or having your bathroom with water that isn't warm enough or even too hot. Whatever the instance may be, water heater problems can be quite nerve-racking. Fortunately, we have actually made a listing of feasible options to your water heater concerns. There are a variety of elements that could trigger a number of these problems, maybe a concern with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you shut off the main power supply for safety and security. Whatever the issue is, getting it fixed must not posture excessive of a concern if you comply with these actions:
Inspect Your Power Supply:
As standard as this may appear, it is extremely needed. Without sufficient power, your water heater will certainly not work. So the first thing to do when your water suddenly stops working is to validate that it isn't a power problem. Examine if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, merely turn it off and on once more. Replace any type of busted or damaged fuse. Examine the home appliance with power after these adjustments to see if it's now working.
Examine the Heating Element in the Water Heater:
If it's not a power issue, after that try checking out your heating element if it is still functioning. Examine each of your heating elements to make sure the trouble isn't with any of them. If any of them is malfunctioning, replace that part and afterwards examine whether the hot water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't hot enough, you might require to check the temperature level setups on your upper thermostat. Make certain the breaker is switched off before doing anything. Open the access panel and also press the red switch for temperature reset above the thermostat. This ought to help heat up the water. Turn the breaker back on and also check if the trouble has actually been dealt with.
Call A Specialist:
If after replacing all faulty components as well as resetting your temperature, the hot water heater still isn't functioning, you might require to speak to an expert plumber for a professional point of view. The problem with your heater could be that the hot and cold taps have been switched or it may be undersized for the amount of hot water required in your house. Whatever the case may be, an expert plumber would certainly assist fix the trouble.
Final thought
Hot water heater issues are not always significant. A lot of them are because of minor problems like a blown fuse or damaged heating element. Replacing the defective parts should suffice. Nevertheless, if you are still not able to resolve the problem, give a call to your nearest plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our excerpt about No Hot Water — Water Heater Repair. Thanks a ton for taking time to read through our piece of content. If you liked our blog post kindly do not forget to pass it around. Thank-you for going through it.
Check Us Out Report this page